PDA

View Full Version : Adjustable Rear Toe-In On A RS4 3 TYPE SS =)



josh222
05-13-2004, 09:20 PM
I have got away to have adjustable rear toe-in on my RS4 3 TYPE SS :D I am going to use front c-hubs and knuckes plus all the nesacery hardwhare, plus 2 turn buckes. It will only cost $20. I will put some pics when I do it. What do you people think?

SteveK
05-13-2004, 09:55 PM
If the front and rear suspension arms are the same length, that should work. The old Tamiya TA03 could be made to use that, because the front and rear suspension arms were the exact same parts. The RS4 Pro/Rally/Sport can't use that because the front arms are much shorter.

Be sure to test-fit with the parts you have before dropping any money on it.

losiguy1090
05-14-2004, 07:39 AM
thats how the savage is. the front and rear suspension is exactly the same so it has adjustable rear toe.

josh222
05-14-2004, 08:07 AM
They are slightly different , I have to cut a small groove in the rear arms to get the c-hubs to fit, other than that it is easy. I think this a great idea :)