PDA

View Full Version : savage problem



ashman6000
08-25-2007, 07:43 PM
hears th deal i upgraded my 25 savage with a hpi 4.6 i am having problems with getting it to shift. I have tryed to lean it out an then it shifts but the temps are above 300, i have also tryed chainging the shift points in the trans, i am running a 49t spur and a 16t bell, the ony other thin i can think that is causing this is this gear set up. any ideas

savage100
08-25-2007, 08:10 PM
Does it sound like it is over reving and not going very fast? If it does then it is the gearing. Also, you are going fast enough to shift, right? Try adjusting the shift points some more. Try to get the shift point so it will shift at low speeds and see if that makes a difference.

ashman6000
08-25-2007, 08:13 PM
thats exzatley what is happining if im going up a hill, and as i said i can get it to fly if i lean it out and then it shifts but my tems get to high

savage100
08-25-2007, 08:16 PM
whats happening? over reving? try adjusting other settings on the engine rather than just the high speed needle.

rccardude04
08-26-2007, 03:07 AM
Spamming - posting the same or similar threads in multiple forums is not permitted. Please take a moment to review the available forums and post your thread in the most appropriate area. If the administrators or moderators determine that the thread belongs in another forum, it will be moved. If you are unable to find a thread you posted, a quick search will reveal its new location if it was moved.

http://forums.radiocontrolzone.com/showthread.php?t=190148

You new people really need to read the stinking rules before posting.
-Eric

xfusion
08-26-2007, 03:39 AM
OMG this guy posted this same question like 6 times. You deserve a messed up nitro truck for getting me and my pal rccardude so upset, I hope it self destructs.

rccardude04
08-26-2007, 10:12 AM
xfusion, that's not quite what I meant. Nobody deserves a messed up truck. Just... people, don't post the same thing 2+ times.
-Eric

rccardude04
08-26-2007, 02:47 PM
And so I'm being helpful, like i posted in your other version of this thread, slipper clutch.
-Eric

xfusion
08-26-2007, 04:09 PM
xfusion, that's not quite what I meant. Nobody deserves a messed up truck. Just... people, don't post the same thing 2+ times.
-Eric

You can be the nice guy, I'm still going to be an ass lol.