PDA

View Full Version : rim help!!!



R/Ckid15
04-25-2002, 12:53 PM
i got the rpm calwz. i tried to put the on my duratrax maximum st, but they wont fit. there 2.2 rims. do i need to modify it at all. i have no clue???. thanks

pudder
04-25-2002, 07:24 PM
What truck are the rims for? If you look where they hex's are supposed to be, and see a little groove there, you bought the wrong rims.

-mike

R/Ckid15
04-25-2002, 07:52 PM
i got them to fit. my cvd on the st is loose how can i get the cvd to tighten up??.

pudder
04-25-2002, 08:15 PM
How is it loose? Is there a lot of play in the CVD? If it is rebuildable, get new pins for it, otherwise I don't think there is anything else that would work.

-mike

R/Ckid15
04-26-2002, 09:17 PM
my bushings were shot to bits.

Conman
04-27-2002, 11:55 PM
Replace the bushings with bearings.

R/Ckid15
04-28-2002, 02:59 PM
how do i take them out. ive never done it.

pudder
04-28-2002, 05:48 PM
Take a small flathead screwdriver that will fit through the bushing hole, and pry it out. If that doesnt work, try something else.

-mike