Notices
 

Thread: Pictures of your Monster Trucks.

  1.  
    Join Date
    03-13-2011
    Location
    brampton,ontario,canada
    Posts
    318
     

  2.  
    My old E-Maxx... So much done to this... Full 3905 updates, RPM treatment, FLM chassis & braces, Traxxas big bores, Novak HV-PRO runs superb on 4S, GorillaMaxx single speed conversion, rear traxxas bulks, revo diffs, custom battery box, and one of my favorite mods I did, a Robinson Gen I spur gear mated to a Revo slipper clutch. It took a long time but this truck takes serious abuse now.



     

  3.  
    e-savage I had for years. I had a novak brushless system that finally gave up. This guy has FLM extended chassis, e-maxx half shafts, Savage flux battery box and CEN GST shocks. This truck is super reliable on 2S with the occasional 3S romp.

     

  4.  
    The latest is an XXL that I just got from eBay, was basically brand new, for $300 RTR with Spektrum setup. I just went through it and replaced the clutch. The XXL is my only nitro MT; The LST/LST2/XXL chassis is one of my all time favorites.

     

  5.  
    Join Date
    04-28-2002
    Location
    Lewisville, TX
    Posts
    241
    My Savage X SS. Not too much in the way of hop-ups. Integy piggyback shocks, upgraded HPI brakes, HPI swaybars, Axial Beadlocks with Pro-Line Trencher 3.8 tires, and Integy side braces. Also added some braided fuel line for looks.



    Um, I think I broke something...
     

  6.  
    Join Date
    01-14-2011
    Location
    Christiansburg, VA
    Posts
    32
    Nice truck, jayhawk...I have the same wheel/tire set up on my summit. After every run, at least one of the tire beads comes loose from the wheel. Those Axial beadlocks weren't designed very well. Wondering if you have the same problem.
     

  7.  
    Join Date
    04-28-2002
    Location
    Lewisville, TX
    Posts
    241
    I haven't had a chance to run the new wheel/tire combo yet. I am still in the midst of breaking in the engine. It would have been done already, had my roto start not died on me the other day. I need to remount all the wheels, because I didn't get a good enough lock on the bead of the tire.
    Um, I think I broke something...
     

  8.  
    Join Date
    04-23-2012
    Location
    Calgary, Alberta, Canada
    Posts
    11
    Here`s a shot of my Revo build.
    This was/is my first try @ painting, 4 rattlecans...

    I can`t remember exactly what all I`ve added so far, But this is definitely my favourite truck.
    Check out My Photobucket for more build pics if you're so inclined..
    Thanks for looking
    -D-
     

  9.  
    Join Date
    04-25-2004
    Location
    LONG ISLAND,NY
    Posts
    7,335
    Did some bashing around in my driveway with my 4 yr old nephew,the digger pede is his and the regular pede and sledgehammer are mine,lol

    the trucks

    he crashed his digger pede into one of my trailers and nicked the windshield,he wants a new body now,lol:
     

  10.  
    Xtremes Stampede - MMP SCT 550/2400 - 4s Lipo - AllRPM - AllMIP




    New lid and GoPro Hero2 mounted for some vids
     

  11.  
    Join Date
    01-14-2011
    Location
    Christiansburg, VA
    Posts
    32
    [ame="http://www.youtube.com/watch?v=l8EoXVJeBDM"]http://www.youtube.com/watch?v=l8EoXVJeBDM[/ame]
     

  12.  
    Join Date
    01-14-2011
    Location
    Christiansburg, VA
    Posts
    32
    [ame="http://www.youtube.com/watch?v=5gfAgPCjpZ8"]http://www.youtube.com/watch?v=5gfAgPCjpZ8[/ame]
     

  13.  
    Join Date
    05-31-2011
    Location
    where it all goes down
    Posts
    1,046
    finally got myself a "monster truck"
    HPI Savage XS SS kit.
    motor: n/a (as of this post i haven't bought one yet)
    ESC: Mamba Max Pro
    servo: Hitec HS-7985MG
    radio: futaba 3PL
    other features: bigfoot 8 paint job
    im suburban hooligan and i approve this message
     

  14.  
    Join Date
    05-31-2011
    Location
    where it all goes down
    Posts
    1,046
    update. XS SS kit now equipped with el camino body, RPM revolver rims and tamiya blackfoot tires.
    im suburban hooligan and i approve this message
     

  15.  
    Join Date
    05-31-2011
    Location
    where it all goes down
    Posts
    1,046
    the new clodbuster
    im suburban hooligan and i approve this message
     

  16.  
    Join Date
    05-31-2011
    Location
    where it all goes down
    Posts
    1,046
    updated clod pic's
    stock body in box art


    proline 67 F-150 body for bashing
    im suburban hooligan and i approve this message
     

  17.  
    Join Date
    01-19-2015
    Location
    La Crescenta Montrose, CA
    Posts
    31
    Wow, superb monster trucks here. All are amazing.
     

Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •