Notices
 

Thread: is this ok before i start painting?

Results 1 to 3 of 3
  1. Smile is this ok before i start painting? 
    #1
    hello, im new to this area really but know abit, in the middle of setting up my trim tabs, and turn fins, i have set them up just whated your views to see if ive done it right...

    My boat is 44" long (50.5 " including the length of rudder) and 13" wide. Its powered by a .61 sc nitro engine. It was a wreck when i got it, so rebuilt everything on it where i was happy, im a perfectonist. Anyhow these are the pictures of it.











    hope you like, also i set the trim tabs up around 1/8"

    regards

    danny
     

  2.  
    #2
    Join Date
    05-03-2016
    Location
    San Jose, CA
    Posts
    2
    The Pictures seems Fine.
     

  3.  
    #3
    Join Date
    08-08-2002
    Location
    Kalamazoo, Mi.
    Posts
    3,195
    Hopefully I'm not too late as this site is really slow and not a lot of postings in a while. I'd move the turn fins out about another 1/2" and make sure they're square to the bottom of the Vee and tuck them in more as they're too far out.
    I sure hope that's not the prop you plan on using as it's way too small and plastic. You're going to need room for a drive dog, a bigger prop and the prop nut.
    Do not fold, spindle or mutilate.
     

Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •