MIP would like to introduce the drive system of the future, for all Mod 2wd vehicles; MOD #14215 MIP ‘SHINY’ PUCKS™ SYSTEMS!!!! These systems are of steel construction, keeping to relatively the same overall weight that you are used to with your steel OEM drivetrain; but giving you the added benefit of MIP Pucks™ that are fully serviceable. No longer will diff outdrives and CV bones wear simultaneously, with the puck system all that is needed is to easily change Pucks™ when necessary, and the drivetrain stays tighter, fresh, longer. This added benefit equates to less money, less time off the track for rebuilds, and keeps your vehicle more competitive.
Serious racers looking for a competitive advantage on the track
Racers with 13.5 or higher motors
Less overall wear on drive components
Replaceable Pucks to keep drivetrain fresh
Race Prove C-CVD™ Construction
Two sets of holes in the C-CVD™ bell
100% Quality made in the USA!
MIP Confetti Sticker (2), MIP Thread Gel Safety Sheet (1), MIP Instruction Sheet (1), Diff Lube & Grease Cup (1), 3/32” Chrome Steel Ball Bearing (12), 1/16” Chrome Steel Ball Bearing (7), MIP Modified Diff Ring (2), Ľ” x 9/32” Diff Spring (1), 2-56 x .925 Shoulder Diff Screw (1),#2 Hardened Washer (1), MIP Thrust Retainer (1), MIP T-Nut (1), MIP Thrust Diff Cover (1), Diff Gear 52 T 48P (1), 5/32 x 5/16 x .125 Bearing (2), MIP Pucks™ Male Outdrive (1), MIP Pucks™ Female Outdrive (1), 4-40 X 3/32” SHSS Cup Point (2), 1/16” x .430” Solid Pin (2), 8-32 Steel Locknut (2), 1-72 x 1/8” Button Head (6), MIP 3/16” CVD™ Coupling (2), 1/16” x 3/8” Roll Pin (2), MIP Lube & Thread Gel Cup (1), MIP Retaining Ring (2), MIP CVD™ Puck Pin (2), MIP Outdrive Pucks™ (8), MIP CVD™ Axle (2), 3/16" x .010" Steel Washer (4), MIP Pucks™ Shiny C-CVD™ Bone (2)
Trevor “Chilly” Duncan | Online News Editor | Air Age Media email@example.com | firstname.lastname@example.org
Radio Control Car Action | RCCarAction.com
Model Airplane News | ModelAirPlaneNews.com
RotorDrone Magazine | RotorDroneMag.com