Thread: Vaterra 1/10 Twin Hammers 1.9 Rock Racer Kit

Results 1 to 3 of 3
  1. Vaterra 1/10 Twin Hammers 1.9 Rock Racer Kit 

    Latest from Vaterra:

    Named for a pair of infamous off-road trails in California’s Mojave Desert, the Twin Hammers® rock racer epitomizes the spirit of 4WD adventure. This kit version lets experienced RC drivers build the vehicle to their specifications, using the electronics and power system of their choice. It also takes the performance of this proven platform to the next level by including the option parts that have been most popular with the RTR version. These would include options like licensed Interco Super Swamper Tires, a front locker, heavy duty front axle outdrives and more.


    • 4-Wheel Drive
    • Shift-on-the-fly, two-speed transmission
    • Metal transmission gears
    • Metal gear differentials
    • 4-Link rear suspension
    • Threaded-body aluminum shocks
    • Licensed Interco Super Swamper tires
    • Independent cantilever front suspension
    • Metal 12mm hexes
    • Dual position battery tray
    • Heavy duty outdrives
    • Front differential locker
    • Front and rear swaybars
    • Clear body panels
    • GenRight™ decal sheet

    Needed To Complete

    • Transmitter and receiver (3-channel system required to operate two-speed transmission)
    • Steering Servo
    • Shift Servo (optional)
    • ESC
    • Battery
    • Charger
    • Motor
    • Pinion
    • Polycarbonate Paint


    Vehicle Type: Rock Racer
    Completion Level: Kit
    Size/Scale: 1/10
    Length: 18.00 in (457.2mm)
    Width: 5.90 in (149.9mm)
    Height: 6.50 in (165mm)
    Ground Clearance: 2.25 in (57mm)
    Wheelbase: 11.60 in (294.6mm)
    Front Track: 10.00 in (254mm)
    Rear Track: 10.00 in (254mm)
    Chassis: Molded Composite
    Suspension: Cantilever (front), Trailing Arm (rear)
    Shock Type: Aluminum Oil Filled Coil-over
    Drivetrain: 4WD
    Differential: Open (front), Locked (rear)
    Wheel Type: 1.9" Bead Lock
    Wheel Diameter: 2.25 in (57mm) overall, 1.90 in (48.2mm) bead surface
    Wheel Width: 26mm Outside to Outside of Bead Lock
    Tire Compound: Blue Compound
    Tire Tread: Licensed Interco Super Swamper STL SX
    Tire Diameter: 4.6 in (116.8mm)
    Motor Size: 540 Required
    Pinion: 28T (recommended)
    Spur Gear: 78T
    Gear Pitch: 48P
    Internal Gear Ratio: High Gear - 2.27:1 Low Gear - 4.05:1
    Final Drive Ratio: High Gear - 18.1:1 Low Gear - 32.1:1
    Speed Control Included: N
    Radio: 2 Channel (3 channel required to operate optional 2-spd transmission)
    Servos Included: N
    Batteries: Not included
    Charger: Not included
    Body: Unpainted Clear Polycarbonate Panels (flat hood and roof) w/ GenRight Decals
    Ball Bearings: Yes
    Recommended Environment: Off-Road
    Approx Assembly Time: 10-15 Hours

    VTR03001 - $279.99

    Trevor “Chilly” Duncan | Online News Editor | Air Age Media
    Radio Control Car Action |
    Model Airplane News |
    RotorDrone Magazine |

    This I show it should have been to begin with! I'm going to get one, but after I get a Yetti KIT.

    Join Date
    where it all goes down
    bout friggin' time!
    im suburban hooligan and i approve this message

Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts