Notices
 

Thread: 1/5 yeti xl hybrid

Page 2 of 2 FirstFirst 12
Results 26 to 36 of 36
  1.  
    #26
    Join Date
    12-01-2013
    Location
    Omak Washington
    Posts
    222
    These 2 pictures show what a difference 1/2 thick foam vs full foam on the rocks. I installed the RC4WD Desert Reaper fronts for this. They are softer than the Proline Trenchers that I had on before. These are also narrower! I think they are more scale looking also.

    RC4WD TEAM DRIVER
     

  2.  
    #27
    Join Date
    12-01-2013
    Location
    Omak Washington
    Posts
    222
    I'm having a little fun while waiting for parts.
    I installed a Hi-Lift Jack and a larger more scale hood. this time I cut the hood opening so that the motor looks more scale. It is large so, it will get hit alot in roll overs. I built it with a brake-a-way system so that I can make fast easy repairs.

    RC4WD TEAM DRIVER
     

  3.  
    #28
    Join Date
    12-01-2013
    Location
    Omak Washington
    Posts
    222
    I bought 2 mini servos to shift the front end and the trans. I got them from ebay. 1 works and the other doesn't. It's to late to send it back, so I will order another one from him and when it comes in I will send the 2nd bad one back. Its to bad I found out after waiting for ever on the diff cup to come in! I got it all parts in and now I have to wait on parts that don't work. Same thing with the Hitec 5755 servo I bought it used and it is a pile of junk.
    In the pictures below is a white container from OFNA that has Diff-Loc in it. you get 1/2 a container (not much) $12.00 I used it in this diff.
    RC4WD TEAM DRIVER
     

  4.  
    #29
    Join Date
    12-01-2013
    Location
    Omak Washington
    Posts
    222


    I made my own tail light lenses from a real car lens. They are a nice tight fit.
    RC4WD TEAM DRIVER
     

  5.  
    #30
    Join Date
    12-01-2013
    Location
    Omak Washington
    Posts
    222
    RC4WD TEAM DRIVER
     

  6.  
    #31
    Join Date
    12-01-2013
    Location
    Omak Washington
    Posts
    222
    RC4WD TEAM DRIVER
     

  7.  
    #32
    Join Date
    12-01-2013
    Location
    Omak Washington
    Posts
    222
    RC4WD TEAM DRIVER
     

  8.  
    #33
    Join Date
    12-01-2013
    Location
    Omak Washington
    Posts
    222
    RC4WD TEAM DRIVER
     

  9.  
    #34
    Join Date
    12-01-2013
    Location
    Omak Washington
    Posts
    222
    RC4WD TEAM DRIVER
     

  10.  
    #35
    Join Date
    12-01-2013
    Location
    Omak Washington
    Posts
    222
    Quote Originally Posted by Warner View Post
    This would really be good because certainly seeing the way everything with the outcome we do see http://www.myvindecoder.com/infiniti-vin-decoder would actually be very decent and that's the point for which i have always been stepping in.
    It's been a while since I have posted here. I have built a couple more 1/6 scale builds that I enjoy very much.
    RC4WD TEAM DRIVER
     

  11.  
    #36
    Join Date
    12-01-2013
    Location
    Omak Washington
    Posts
    222
    RC4WD TEAM DRIVER
     

Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •