Notices
 

Thread: CONQUEROR Rock Crawler HB 1801 - RC 4x4 - 1/18 - UnBoxing + Review + Tips

Results 1 to 7 of 7
  1. Thumbs up CONQUEROR Rock Crawler HB 1801 - RC 4x4 - 1/18 - UnBoxing + Review + Tips 
    #1
    Hello friends, I have prepared this thread to talk a little about my first Crawler.
    After ordering with free shipping, and wait patiently around 15 days, finally arrived!

    i,m glad to present you to the "little one" of the family. From the manufacturer HB, I have this model P1801 some
    people call it "Conqueror", there are several manufacturers wich has the same or very similar models. JJRC with
    its model JJRC Q21 RC Car Rock Crawler ,
    *WLtoys with your model WLtoys 18428 - B , these I have not tried, but since they
    are similars if not just the same car with diferent controller.. to my understanding they're just as good as this.



    The small crawler, has a scale of 1/18 (1:18) and has a total OFF-Road perosonality. With its 4-wheel drive with an
    engine by axle, this P1801 is capable of climbing by unimaginable places.
    It is made in resistant ABS and with a racing crowler look, full of details.

    The car is RTR, also come with the batteries for the transmitter (a nice detail), you can start playing with it just out
    of the box!
    Even the battery is charged! .. the truth, this little one, has not ceased to amaze me from the first moment that I had
    it in the hands.

    UNBOXING VIDEO


    Thanks to its independent differentials, has a pair of traction much higher than other RC cars, this takes away speed
    but it gives you an extra power, perfect when facing the higher obstacles and climbing above them with ease.

    It has a servomotor for the direction that is mode "all or nothing", like the gas, being perhaps this its greater defect
    i found on it .. But we must remember that it is a car that costs 20, we can not ask for much more for that price.



    It is equipped with independent suspension on the chassis, giving a great travel range of the same and working together with
    the car's engines to get out of any situation where it can be found.

    The car has such nice details as, Seats, steering wheel, spare wheel etc.

    The battery that works is 4.8V and gives you between 15 and 20 minutes of fun, taking to fully charge about 2 hours.
    I bought also 2 extra batteries for it (for 2 each) so they are cheap.
    With the three batteries, I can go for one hour doing Crawling without stopping .. a joy ..

    The command, although simple is nice, I repeat that its controls are a (all or nothing) for both the movement and
    the direction. It works with 3 AA batteries (included), the consumption of the transmitter is minimum. I have calculated
    that it has a range of about 50 meters . Distance more than enough by the size of this small P1801 Crawler. It works at
    2.4GHz, 2Ch so it's perfect for running more cars at the same time without interference.

    In short, I see it a very versatile car, both for a small child, for its easy handling, low speed size and weight, and also
    *I see it a great car, for those who would like to tune up a crawler a little more serious but do not want to spend the 100
    they usually cost.

    It is clear, this truck will always be a "toy" but if you are a little handy, it will not cost much to modify and improve it.



    I'm thinking of updating it with an ESC and a digital servo of the directon it brings, for what it is, it's not going bad either, but I can not control The throthle is what most bother me when it comes to going to the field. Even so, the fun is assured.


    Pros:
    its price! About 20
    Shock Resistance
    Several manufacturers make similar models (easily interchangeable parts)

    Cons:
    Address and gas all or nothing

    Links of interest

    You can see more technical features here:
    Direct link to HB P1801 http://www.gearbest.com/rc-/pp..
    Direct link to extra battery http://www.gearbest.com/rc-/pp..
    Use these codes to have more decuentro: RC15OFF , RC18OFF , RCOF


    Friends, this car goes all over the place! And proof of it, I leave these little videos that I mounted having a good time with him.

    HB P1801 Rock Through Crawler First Run - 1 # Adventure 1/18 4WD @ The Road


    HB 1801 - CONQUEROR 4x4 Rock Crawler # 2 Adventure 1/18 @ Cas berris Torrent


    All the other videos here:
    SongoLand YouTube

    I'll hang around here the things I'm doing to the little one.


    a greeting!
     

  2.  
    #2
    Join Date
    12-14-2006
    Location
    Houston, Texas USA
    Posts
    34
    Two fun runs to watch. Thanks for posting up the videos. Look forward to more adventures with the little one. I can see what you mean about throttle full on and steering full lock. Near the end of video two it looked like you were adapting to it.

    Haven't checked to see if it is available here in the States. But for the price, it looks neat and appears rugged. MOA (Motor on axle) is something usually only seen with high end competition rigs.

    Cheers, AC
    Arnie Hauswald Racing 1943
     

  3.  
    #3
    Quote Originally Posted by AHR43 View Post
    Two fun runs to watch. Thanks for posting up the videos. Look forward to more adventures with the little one. I can see what you mean about throttle full on and steering full lock. Near the end of video two it looked like you were adapting to it.

    Haven't checked to see if it is available here in the States. But for the price, it looks neat and appears rugged. MOA (Motor on axle) is something usually only seen with high end competition rigs.

    Cheers, AC
    THanks for your coment AHR43! i agree,, im pretty sure it is aviable for usa, im thinking in get the one from WLToys in orange , jeje defnly i need a mate for the adventures of this one :P

    if the wether is nice, tomorrow we have planed go with the RC for a bit.. if i have chance will try to record a new video

    agretting
    songo
     

  4.  
    #4
    i made some iprovements in this little crawler HB 1801

    New ESC and servo direction (proportional) and new Reciver.. works just awesome.



    a gretting
     

  5.  
    #5
    Join Date
    12-14-2006
    Location
    Houston, Texas USA
    Posts
    34
    Hello sOnGoku,

    O.K. on the mods to your 1801. Looks like it was made with modifying in mind. I have not seen the technique you used to form the servo hold down. Interesting how you did that. O.K., sOnGoKu, ready for field trials and another one of your adventures with the mod 1801 now. Thanks and good luck.

    Cheers, AHR43
    Last edited by AHR43; 01-29-2017 at 09:44 AM. Reason: add greeting
    Arnie Hauswald Racing 1943
     

  6.  
    #6
    thanks loots firiend AHR43 , the tech nique used for hold the servoo , ejejeje , that was a quick invention, :P ,, i need to work out a nice model for 3D print this part and will bee and look much muchbetter. Thanks for stop by my post and coment freind. Really apreciate it.. a gretting and happy sunday
     

  7.  
    #7
    Helow friends, i have done some new video os this great HB 1801 crawler.

    In this one i have design a new support for the servo direction (DIY) with my 3d printer.


    In this one i have make a nice Outdoor test for this little.


    Hope you enjoy it

    a gretting
     

Tags for this Thread

View Tag Cloud

Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •